Как сделать блесну своими руками

At the moment, there are many different spinners but unfortunately, the store can not always find the right lure or it is not enough. Many fishermen have included your imagination and make your own jig from scrap materials.
How to make a spoon with your hands?

Now we look at how you can make some types of lures and the first of them is torpedka.

You will need:

Slim, stainless metal. For example, aluminum jar
Guitar string or wire
Swivel
Paste GOI
clockwork rings

First you need to make a template. To do this, draw the outline on a thick cardboard and move it to the base material. Next, carefully cut along the contour;
The blank is folded in half to get two equal parts;
The edges are processed sandpaper;
By pattern solder fittings made of two verlyug wired or guitar strings;
To give a more attractive appearance spoon, smear the paste GOI. To scaffold suddenly cut short when confronted with the spoon, you need to attach an additional wind-rings.

Spoons.

How to make a spoon with your hands? To do this you will need:

Copper base material;
Hook;
Plaque;
Ring mounting;
Drill.

To make Spoons need:

Draw a pattern on the base material in the form of diamonds and carefully cut it with sharp scissors;
In the template, draw a smaller axle and bend her draw the outline;
Expand the workpiece in a horizontal position. On the lower part of the blank need to solder a metal plate in the form of small triangles. It is necessary to solder the hook;
To the top of the solder preform mounting ring and drill a hole for the fishing line;
At the end of handle spoon sandpaper.

Lures for fishing in troubled waters

In the waters of the country the water is not very clear. Most of the rivers have muddy water, but this water is rich in fish, which is necessary to attract a special spoon. Make a spoon made of materials with a chrome surface.

This requires incised into two parts chrome tube;
Scissors on metal thread;
Abrasive paper;
Drill and soldering iron.

How to make:

The length of the pipe is necessary to bend so as to obtain a slight bend on which to draw a pattern round shape, reminiscent of a small fish.
By the end of the large diameter solder hook;
The edges are processed sandpaper;
In the narrowest part of the drill a small hole for the fishing line;
For most of its attractiveness promazhte paste GOI.

spinners

On this lure can get a good catch, as she is very attracted fish.

To do this, you need to take:

Any tubular material, stainless steel is desirable;
Drill;
Soldering;
Beads, crystals thread that will attract the fish.

How to make:

Material cylindrical shape you need to take with a decent weight to it immediately sank to the bottom;
The material drilled hole for thick fishing line;
Hook soldered so that it was directed to the sinker;
For cylinder glue rhinestones and beads and cover paste GOI.

This baubles in rotation will create turbidity in the water and that attract the fish.

When it comes to fish near perfect baubles nezatseplyayka.

How to make a spoon with your hands? To do this, take:

with a diameter of 0.5 steel wire
Antennae;
An analogue of a spinner;
Hook;
Soldering iron.

Take the hook and solder it to the analogue spinners. This is called double trolling, and it costs quite a bit;
From the inside, attach the antennae, so that they were directed to the bottom spinners;
Solder the wire structure.

How to lure their own hands

How to lure from the cover

Catch large predator on your lure you to the fishing lodge Zavidovo.