Ловля рыбы кружками

In different places of our country has developed different names such gear like mugs. They are also called wheels, postawski.
To catch using this gear, is very attractive in the sense that the fisherman does not sit up and misses, he always has to move, despite the fact that he is in the boat.
Mugs for fishing with your hands

On a wooden pin is worn flat disk, which is wound fishing line. The disc itself are usually made from foam or light wood, diameter 150mm, thickness – 30mm. The fishing line is wound on the rim depth of 10mm. On the upper end of the pin is cut 1mm to 20mm.
This structure special paint colors: top in red or orange, while the bottom of the mug in white color, part of pin with slot in black color, the rest in the bright, white color. After drying the disk and pin are numbered.
Next Cup is attached to a solid nylon cord, it is desirable that it was twisted or braided.
To scaffold is not alarmed the fish, you need to use green color, you can paint in brown or brown tint.
To prevent tangling of fishing line with live bait, you should do the insert between the fishing line and leash, its length can be a half or two meters.
Passing through the metal carabiner leash, it is attached to the end of the line. The leash is attached at the top and load hook at the bottom.
Good leaders are not shiny leashes made of brass, nikeline of another material, with the requirement that they were not springy, such will prevent the ingestion of live bait fish. Some fishermen make leashes composite, i.e. consisting of ten parts.

The hooks will fit sharp and not very large, live bait for a long time should be moveable.
For transporting such equipment suitable belt from an old car camera, which will not allow to peripatetica hooks and fishing line. Here is how you can make a mug for fishing with their hands.
How to fish mugs

Fishing pin installed in the drive. Then determine the depth, otmelivaetsja the right amount of scaffold, it is placed in the slot on the pin. Part of the fishing line with a sinker and hook with a nozzle lowered into the water.

The circle turns red side up and while fishing just floating in the water.
When the fish grabs the bait, the disc will turn white side up, it will spin, as the fish will pull the line. Painting gear will help the fisherman to keep the situation under control.
This tackle can be done by hand. The complexity will only cause the pin pointer. It is necessary to drill a hole in the center of a width slightly greater than half the diameter of the pin. This work is very thin, it should not affect the strength of the walls.

Received the hole need to Polish with sandpaper, rolled into a tube. After this, you should lubricate the hole with glue BF-12 and drying for two days. Giving the glue to dry, you need a channel to fill, half fill it, balls No. 10. The hole is sealed with a cork, which for strength should be fastened with thin nails, terminates the operation of the waterproof plaster.
Tackle this design compact, well worth the wave and perfectly shows the biting of the fish. Fishing circles interesting and productive occupation for the fisherman – try a must!